Stain Remover Poultice


ConfiAd® Adhesive Residue Remover is an effective product, solvent-based, for removing stickers, labels, adhesive tapes, silicone residue from almost any surface.

Water Scale Remover

 

Technical Data Sheets

 

Approx. 0.05~0.40 m²/kg (0.53~4.3 ft2/lb.)
2kg (4.4 lb.), 5kg (11.02 lb.)
2 years approx. if stored in cool place free from frost in it’s tightly closed original packing.

 Characteristics & Properties

 

▶  Removes of food, alkali, epoxy stains.
▶ Effectively removes deep set oil, dirt.
▶ Non-acidic formula.
▶ Easy to use.

 

 

 Method of Use

 

1. Apply poultice to the surface using a spatula. Uniformly
    apply a thick 5~10mm coating.
2. Using a light polyethylene film or other moisture resistant
    material, cover the area treated with poultice. Tape or
    otherwise seal off the edges of the ply film. It also helps to
    poke several small holes in the film, so that the powder will
    dry out. Failure to do this may result in the poultice staying
    wet.
3. Allow paste to remain on the surface for 12 to 48 hours.
    Remove protective film and dry the paste.
4. Scrape off poultice, Wash the surface thoroughly with fresh
    water using a sponge, soft cloth.
5. Repeat application where necessary.
6. Polish the clean surface with a soft dry cloth.

 

 

 Storage

 

▶ Storage temperature: Between 5℃ (41℉) and 30℃ (86℉)
    Must be applied to material at temperature between 5℃
    (41℉) and 30℃ (86℉)

 

 

Field of Use

 

▶ Polished or unpolished marble, limestone, granite and other
    stone surfaces.

 

 

 
   



    Cleaners
 
 

Stone Cleaner

Neutral Cleaner

Neutral Cleaner
(Low Foam)

Rust Remover(Acid)

         
 

Rust Remover(Neutral)

Rust Remover(Gel)

Powerful Acid Cleaner

Limescale Remover

         
 

Grease Remover

Wax Stripper

Adhesive Residue Remover

Sealant Stain Remover

         
 
   
 

Stain  Remover Poultice

Poultice Powder