|
1. Apply the product uniformly to the surface with 5~10mm thick, using a spatula. 2. Using a light polyethylene film or other moisture resistant material, cover the treated area. Tape or seal off the edges of the film and make several small holes on the film. 3. Allow the product to remain on the surface for 12~48 hours. After that, remove the film and fully dry the paste.
4. Scrape off the dried product and wash the surface thoroughly
with fresh water using a sponge or a soft cloth.
5. Repeat the application if necessary.
※ Before applying to the entire surface, test on a small area. | 
.jpg)
-Primium.jpg)
.jpg)
.jpg)
